Related Experiment Video
Updated: Nov 11, 2025

Developing High Performance GaP/Si Heterojunction Solar Cells
Published on: November 16, 2018
High-performance MoO/n-Si heterojunction NIR photodetector with aluminum oxide as a tunneling passivation interlayer
Yajun Xu1, Honglie Shen1,2, Binbin Xu1
1College of Materials Science and Technology, Jiangsu Key Laboratory of Materials and Technology for Energy Conversion, Nanjing University of Aeronautics and Astronautics, Nanjing 211106, People's Republic of China.
Abstract:
The most effective and potential approach to improve the performance of heterojunction photodetectors is to obtain favorable interfacial passivation by adding an insertion layer. In this paper, MoO/Al2O3/n-Si heterojunction photodetectors with excellent photocurrents, responsivity and detectivity were fabricated, in which alumina acts as a tunneling passivation layer. By optimizing the post-annealing treatment temperature of the MoOand the thickness of the ultra-thin Al2O3, the photodetector achieved a ratio of photocurrent to dark current of 3.1 × 105, a photoresponsivity of 7.11 A W-1(@980 nm) and a detective of 9.85 × 1012Jones at -5 V bias. Besides, a self-driven response of 0.17 A W-1and a high photocurrent/dark current ratio of 2.07 × 104were obtained. The result demonstrated that optimizing the interface of heterojunctions is a promising way to obtain a heterojunction photodetector with high-performance.
Related Concept Videos
P-N junction
Metal-Semiconductor Junctions
Schottky Barriers
Schottky barriers arise when a metal with a work function (Φm) contacts a semiconductor with a different work function (Φs). Initially, electrons transfer until the Fermi levels of the metal and semiconductor align at equilibrium. For instance, if Φm > Φs, the semiconductor Fermi level is higher than the metal's before contact. The...
Biasing of Metal-Semiconductor Junctions
In Schottky junctions, where the semiconductor is n-type, applying a positive voltage to the metal relative to the semiconductor reduces its Fermi...
MOSFET: Enhancement Mode
In their basic form, enhancement-mode MOSFETs are typically non-conductive when the gate-source voltage (Vgs) is zero. This default 'off' state means no...

