The Possible Coupling of LNG Regasification Process with the TSA Method of Oxygen Separation from Atmospheric Air

Liquefied Natural Gas (LNG) must be vaporized before it is used in the combustion process. In most regasification terminals, energy that was previously expended to liquefy natural gas is dissipated in the environment. The paper proposes the use of the thermal effect of LNG regasification for the atmospheric air separation as a possible solution to the LNG exergy recovery problem. The presented idea is based on the coupling of the LNG regasification unit with an oxygen generator based on the Temperature Swing Adsorption (TSA) process. Theoretical analysis has revealed that it is thermodynamically justified to use the LNG enthalpy of vaporization for cooling of the TSA adsorption bed for increasing its adsorptive capacity. It has been shown that 1 kg of LNG carries enough exergy for separating up to approximately 100 g of oxygen using the TSA method. Although the paper suggests using the enthalpy of LNG vaporization for atmospheric air separation, similar processes for other gas mixture separations using the TSA method can be applied.