A New BODIPY Material for Pure Color and Long Lifetime Red Hyperfluorescence Organic Light-Emitting Diode

A red fluorescent material, 1,3,7,9-tetrakis(4-(tert-butyl)phenyl)-5,5-difluoro-10-(2-methoxyphenyl)-5H-4l4,5l4-dipyrrolo[1,2-c:2',1'-f][1,3,2]diazaborinine (4tBuMB), as an emitting dopant in a thermally activated delayed fluorescence (TADF) sensitized hyperfluorescence organic light-emitting diode (HFOLED) is reported. The 4tBuMB shows a high photoluminescence quantum yield (PLQY) of 99% with an emission maximum at 620 nm and a full width at half-maximum (fwhm) of 31 nm in solution. Further, it shows a deep lowest unoccupied molecular orbital (LUMO) of 3.83 eV. Thus, two TADF materials, 4CzIPN and 4CzTPN, as sensitizing hosts, are selected on the basis of a suitable LUMO level and spectrum overlap with 4tBuMB. The fabricated HFOLED device with 4CzTPN as a sensitizing host and 4tBuMB as an emitting dopant shows a maximum external quantum efficiency (EQE), an emission maximum, an fwhm, and CIE coordinates of 19.4%, 617 nm, 44 nm, and (0.64, 0.36), respectively. The electroluminance performances of the 4CzTPN sensitized device are higher than those of the 4CzIPN-based device, which is attributed to a higher Förster resonance energy transfer (FRET) rate and reduced intersystem crossing/reverse intersystem crossing (ISC/RISC) cycles of the former. Also, the 4CzTPN-based HF device shows a longer device lifetime (LT₉₀) of 954 h than the 4CzIPN-baed device (LT₉₀ of 57 h) at 3000 cd m^-2. The higher device stability is due to the higher bond dissociation energies (BDEs) of 4CzTPN and 4tBuMB than that of 4CzIPN.