Synthesis and characterization of Mg-Zn ferrite based flexible microwave composites and its application as SNG...

In this article, we propose SNG (single negative) metamaterial fabricated on Mg-Zn ferrite-based flexible microwave composites. Firstly, the flexible composites are synthesized by the sol-gel method having four different molecular compositions of Mg_xZn_(1-x)Fe₂O_4, which are denoted as Mg₂₀, Mg_40, Mg_60, and Mg₈₀. The structural, morphological, and microwave properties of the synthesized flexible composites are analyzed using X-ray diffraction (XRD), field emission scanning electron microscopy (FESEM), and conventional dielectric assessment kit (DAK) to justify their possible application as dielectric substrate at microwave frequency regime. Thus the average grain size is found from 20 to 24 nm, and the dielectric constants are 6.01, 5.10, 4.19, and 3.28, as well as loss tangents, are 0.002, 0.004, 0.006, and 0.008 for the prepared Mg-Zn ferrites, i.e., Mg_20, Mg_40, Mg_60, and Mg₈₀ respectively. Besides, the prepared low-cost Mg-Zn ferrite composites exhibit high flexibility and lightweight, which makes them a potential candidate as a metamaterial substrate. Furthermore, a single negative (SNG) metamaterial unit cell is fabricated on the prepared, flexible microwave composites, and their essential electromagnetic behaviors are observed. Very good effective medium ratios (EMR) vales are obtained from 14.65 to 18.47, which ensure the compactness of the fabricated prototypes with a physical dimension of 8 × 6.5 mm²_. Also, the proposed materials have shown better performances comparing with conventional FR4 and RO4533 materials, and they have covered S-, C-, X-, Ku-, and K-band of microwave frequency region. Thus, the prepared, flexible SNG metamaterials on Mg_xZn_(1-x)Fe₂O₄ composites are suitable for microwave and flexible technologies.