Related Experiment Video
Updated: Nov 9, 2025

Nanothermite with Meringue-like Morphology: From Loose Powder to Ultra-porous Objects
Published on: December 24, 2017
Effect of Bismuth Oxide Particles Size on the Thermal Excitation and Combustion Properties of Thermite Systems
1College of Field Engineering, Army Engineering University of PLA, Nanjing, 210007, China.
Abstract:
The influence of Bi2 O3 particles size at the sub-micron scale on the thermal excitation threshold and combustion performance of nano-thermite systems was investigated. Three formulas were designed and prepared, Al(100 nm)/Bi2 O3 (170 nm), Al(100 nm)/Bi2 O3 (370 nm) and Al(100 nm)/Bi2 O3 (740 nm). The samples were characterized and tested by SEM, XRD, and DSC techniques. Electrical ignition and combustion experiments were performed. The results showed that with the increase of the particle size of Bi2 O3 , in the case of slow linear heating, the exothermic heat decreased (1051.2 J g-1 , 527.3 J g-1 and 243.6 J g-1 ) and the thermal excitation threshold temperature increased (564.52 °C, 658.1 °C and 810.9 °C). Simultaneously, the state of the thermite reaction correspondingly changed to solid-solid, liquid-solid and liquid-liquid thermite reaction. In the case of rapid heating , the increase in particle size increased the excitation current (0.561A, 0.710A and 0.837A). During the combustion process, the thermite system with the smallest Bi2 O3 particle size showed the largest combustion rate, and that with the largest particle size had the longest combustion duration.
Related Concept Videos
Factors Affecting Dissolution: Particle Size and Effective Surface Area
Thermal Sigmatropic Reactions: Overview
Sigmatropic shifts are classified based on an order term [i, j ], where i and j indicate the number of atoms across which each end of the σ bond migrates. Below are examples of a [3,3] sigmatropic shift in 1,5-hexadiene, referred...
Enthalpy and Heat of Reaction
Atomic Spectroscopy: Effects of Temperature
At thermal equilibrium, the relative populations of excited and ground state atoms can be estimated using the Maxwell–Boltzmann distribution. For example, an increase in temperature...
Predicting Reaction Outcomes
Precipitate Formation and Particle Size Control
The obtained precipitate should be either a pure substance of known composition or easily converted to one by a simple process, such as ignition or drying. In addition, the precipitate should be insoluble and easily filterable. In general, filterability...

