Related Experiment Video
Updated: Nov 9, 2025

In Situ Transmission Electron Microscopy with Biasing and Fabrication of Asymmetric Crossbars Based on Mixed-Phased a-VOx
Published on: May 13, 2020
Electron Doping Effect in the Resistive Switching Properties of Al/Gd1-CaMnO3/Au Memristor Devices
Ville Lähteenlahti1, Alejandro Schulman1, Azar Beiranvand1
1Wihuri Physical Laboratory, Department of Physics and Astronomy, University of Turku, FI-20014 Turku, Finland.
Abstract:
We report on the resistive switching (RS) properties of Al/Gd1-CaMnO3 (GCMO)/Au thin-film memristors. The devices were studied over the whole calcium substitution range x as a function of electrical field and temperature. The RS properties were found to be highly dependent on the Ca substitution. The optimal concentration was determined to be near x = 0.9, which is higher than the values reported for other similar manganite-based devices. We utilize an equivalent circuit model which accounts for the obtained results and allows us to determine that the electrical conduction properties of the devices are dominated by the Poole-Frenkel conduction mechanism for all compositions. The model also shows that lower trap energy values are associated with better RS properties. Our results indicate that the main RS properties of Al/GCMO/Au devices are comparable to those of other similar manganite-based materials, but there are marked differences in the switching behavior, which encourage further exploration of mixed-valence perovskite manganites for RS applications.
More Related Videos
Related Concept Videos
MOS Capacitor
The metal gate is typically made from highly conductive materials such as aluminum or polysilicon. Beneath the metal gate lies a thin layer of...
MOSFET: Enhancement Mode
In their basic form, enhancement-mode MOSFETs are typically non-conductive when the gate-source voltage (Vgs) is zero. This default 'off' state means no...
Biasing of Metal-Semiconductor Junctions
In Schottky junctions, where the semiconductor is n-type, applying a positive voltage to the metal relative to the semiconductor reduces its Fermi...
Metal-Semiconductor Junctions
Schottky Barriers
Schottky barriers arise when a metal with a work function (Φm) contacts a semiconductor with a different work function (Φs). Initially, electrons transfer until the Fermi levels of the metal and semiconductor align at equilibrium. For instance, if Φm > Φs, the semiconductor Fermi level is higher than the metal's before contact. The...

