Multiscale sterilizable 3D printed auricular templates to guide cartilaginous framework sizing and sculpture during...

Microtia reconstruction using autologous costal cartilage can be one of the most challenging tasks in reconstructive surgery. An intraoperative guide using 2-dimentional drawing of the contralateral ear on an x-ray film remains the current standard of care. In this paper, we present the use of computer-aided design and desktop 3D printing to fabricate low cost, sterilizable auricular carving templates to serve as a peri-operative reference for microtia reconstruction. The design was made as a single component which incorporated the usual anatomic reference points of the ear based on Nagata technique as a Stereo-lithography file format (. STL) for 3D printing. The templates were created in sizes ranging from 55 mm to 70 mm with a 2 mm increment with an average production cost of 0.26 US dollars per material per template and about 4.5 US dollars for the whole set. Individual templates were then 3D-printed using a thermoplastic polyurethane (TPU 95A) semiflexible filament on a desktop fused deposition modeling, Ultimaker 2 + 3D printer. The produced template tolerated the sterilization process with no structural changes as compared to its pre-sterilization condition. In conclusion, we present cost-effective, sterilizable, multiscale auricular templates to guide the pre- and intra-operative carving of the cartilaginous framework during microtia reconstruction with more accuracy in a time efficient manner, thereby overcoming the drawbacks of using the traditional x-ray film. The templates are readily accessible and sharable for free through open-source software and can be directly 3D-printed using an affordable desktop 3D printer.