Extraction of stabilizers from polymers: Separation of oligomeric hindered amine light stabilizers and phenolic antioxidants from polyolefins using liquid chromatography and high-temperature solid-phase extraction

The extraction of different stabilizers from a polymer matrix and the subsequent separation of said stabilizers is one of the most important as well as challenging undertakings in polymer chemistry. A multitude of stabilizers exists, each of which may be hard to extract, be difficult if not impossible to separate from other stabilizers or necessitate very selected and time-consuming intermediate stages for separation. Certain polymer matrices even pose additional challenges, such as polyolefins being only soluble at elevated temperatures. One of the most well-established approaches for the extraction of stabilizers is Soxhlet extraction. However, even this highly successful approach shows only limited success with regard to the extraction of the ever more relevant oligomeric stabilizers or the extraction of multiple stabilizers in a one-shot approach. Moreover, performing Soxhlet extractions often necessitates ≥24 h. For these reasons, alternative approaches for the extraction of stabilizers from polymers are highly sought after. An approach with enormous potential is solid-phase extraction, which allows the selective retention and enrichment of stabilizers. Herein, the very first application of high-temperature solid-phase extraction for the extraction of stabilizers from polyolefin matrices is described; as with other extraction techniques, the identification and quantification of the stabilizers is then allowed. At temperatures of 140-160°C, it was possible to adsorb common polyolefin stabilizers selectively on a silica solid phase from their polyolefin matrix. To predict high-temperature solid-phase extraction test conditions, first LC tests are necessary, offering an elegant approach for the separation of polyolefins from oligomeric stabilizers, which was not achievable until now.