Fault-Tolerant Adaptive Learning Control for Quadrotor UAVs With the Time-Varying CoG and Full-State Constraints
Abstract:
Most existing control methods for quadrotor unmanned aerial vehicles (UAVs) are based on the primary assumption that the center of gravity (CoG) is fixed and is in the same position as the centroid, which is not necessarily true with swing load as continuously making CoG vary with the swing angle and substantially complicating the dynamic model of UAV. This article presents an adaptive learning and fault-tolerant control scheme for quadrotor UAVs with varying CoG and unknown moment of inertia. First, we establish the dynamic model of quadrotor UAVs in the presence of time-varying CoG, input saturation, and actuator fault. Then, we design a fault-tolerant adaptive learning controller for the quadrotor UAVs and show that both linear and angular velocity tracking errors are ensured to converge to a residual set around zero in the presence of full-state constraints. Furthermore, all signals in the closed-loop system are uniformly ultimately bounded. Simulation studies also confirm the effectiveness of the proposed control method.
Related Concept Videos
Controller Configurations
Control-system compensation involves various configurations, most commonly series or cascade compensation, in which the controller...
Relative Motion Analysis using Rotating Axes-Problem Solving
Here, in order to determine the magnitude of velocity and acceleration for point...
Absolute Motion Analysis- General Plane Motion
As the drone's propellers rotate, an upward force is generated that counteracts the force of gravity, enabling the drone to lift off from the ground. This initial movement of the drone is along a straight path, representing a form of translational motion. In this phase, every point on the...
Feedback control systems
Linear feedback systems are theoretical models that simplify analysis and design. These systems operate under the principle that their output is directly proportional to their input within certain ranges. For instance, an amplifier in a control system behaves linearly as long as the input signal remains within a specific range. However, most physical systems exhibit inherent nonlinearity...
One-Degree-of-Freedom System
A one-degree-of-freedom system is defined by an independent variable that determines its state and behavior. One example of a one-degree-of-freedom system is a simple harmonic oscillator, such as a...
Time-Domain Interpretation of PD Control
Consider the example of control of motor torque. Initially, a positive...

