Cellulose nanofibrils reinforced PBAT/TPS blends: Mechanical and rheological properties

Poly(butylene adipate-Co-terephthalate)/thermoplasticized starch PBAT/TPS blends are among the most produced biodegradable plastic for wide application packaging, sharing more than 20% of the global production capacity of bioplastics. However, this class of material suffers from poor mechanical strength in comparison of neat PBAT, especially when the TPS content exceeds 30 wt%. Aiming at enhancing the mechanical performance of PBAT/TPS blends while maintaining relatively high TPS content, cellulose nanofibrils (CNFs) was incorporated into the TPS phase using twin screw extrusion. The effects of CNFs content on the microstructure, mechanical properties, melt-rheology and humidity absorption were investigated. An enhancement in the tensile strength and modulus was noted with the inclusion of CNFs, with optimal performance attained at 8 wt% of CNFs. A narrowing in the distribution of the TPS nodules within the PBAT matrix was also observed with the addition of CNFs, which is expected to be on the origin of the main evolution in the mechanical, rheological and humidity observed. Because of the availability of CNFs, biodegradability and facile processability, the ternary PBAT-TPS-CNFs blends might contribute to improve the performance of this class of biodegradable bioplastic.