Related Experiment Video
Updated: Nov 8, 2025

Fabrication of Flexible Image Sensor Based on Lateral NIPIN Phototransistors
Published on: June 23, 2018
Base-width modulation effects on the optoelectronic characteristics of n-ITO/p-NiO/n-ZnO heterojunction bipolar
Jun-Dar Hwang1, Yu-En Hwang1, Yu-An Chen1
1Department of Electrophysics, National Chiayi University, No. 300 Syuefu Rd., Chiayi City 60004, Taiwan.
Abstract:
ITO/NiO/ZnO npn heterojunction bipolar phototransistors (HBPTs) with various base widths are fabricated using a radio-frequency sputtering system. The effects of base-width modulation on the optoelectronic characteristics of the prepared HBPTs are studied. The dark current of HBPTs decreases with increasing base width because the injected electrons from the emitter are recombined in the wide base region. The photocurrent increases with decreasing base width, which is attributed to higher emitter-base injection efficiency. The responsivity increases with the collector-emitter voltage (VCE) in the HBPTs with a 100 nm base width, whereas the responsivity sharply decreases atVCE> 4 V for the HBPTs with a thinner base width (80 nm) due to the punch-through effect. In contrast, the responsivity approaches saturation at largeVCEfor HBPTs with a thicker base width (120 nm). The responsivity and detectivity decrease with increasing incident light intensity, which is caused by an increase in the base recombination loss. The HBPTs with a base width of 100 nm exhibits the largest responsivity and detectivity; their detectivity is higher than that of HBPTs with base widths of 80 and 120 nm by approximately two and three orders, respectively.
Related Concept Videos
Biasing of P-N Junction
In equilibrium, no external voltage is applied across the p-n junction. The depletion region is formed at the junction interface due to the diffusion of carriers, which leaves behind charged dopants, acceptors on the p-side, and donors on the n-side. These immobile charges create an electric field that prevents further diffusion of carriers. The related energy band...
P-N junction
Biasing of Metal-Semiconductor Junctions
In Schottky junctions, where the semiconductor is n-type, applying a positive voltage to the metal relative to the semiconductor reduces its Fermi...
Metal-Semiconductor Junctions
Schottky Barriers
Schottky barriers arise when a metal with a work function (Φm) contacts a semiconductor with a different work function (Φs). Initially, electrons transfer until the Fermi levels of the metal and semiconductor align at equilibrium. For instance, if Φm > Φs, the semiconductor Fermi level is higher than the metal's before contact. The...
Bipolar Junction Transistor
MOSFET: Enhancement Mode
In their basic form, enhancement-mode MOSFETs are typically non-conductive when the gate-source voltage (Vgs) is zero. This default 'off' state means no...

