Effect of Iron-Carbon Micro-Electrolysis-Fenton on the Dewatering Performance of Sludge

In this paper, combined with iron-carbon micro-electrolysis-Fenton method, the sludge was adjusted, and the cracking performance and dewatering performance of the sludge were studied. Single factor experiments show that when the amount of iron powder is 1.2 g/L, the reaction time is 45 min, H₂ O ₂When the dosage was 4.2 g/L, the protein and polysaccharide content in the sludge decreased by 46.8 and 20.6, respectively. Compared with the original sludge %. Compared with the original sludge, the COD of the supernatant of the solution increased by 10.1%. The minimum moisture content of the treated sludge cake was 69%, and the SRF value was significantly reduced.The lowest value is 2.687×10 ¹² m/kg. During the micro-electric dust removal sludge, the Fe ²⁺can form a Fenton reagent with H₂ O ₂, thereby reducing the amount of additional iron powder that needs to be added in the conventional Fenton reaction. Three-dimensional fluorescence spectroscopy analysis showed that the humic acid and fulvic acid in the supernatant of the iron-carbon micro-electrolysis-Fenton conditioning solution increased more than after single electrolysis, indicating that the dehydration performance of the sludge was better.The Fenton reagent is formed , thereby reducing the amount of iron powder that needs to be added extra in the conventional Fenton reaction.