A green fabrication method of poly (lactic acid) perforated membrane via tuned crystallization and gas diffusion...

Poly (lactic acid) (PLA) perforated membrane is typically obtained through the solvent-volatilization-induced or non-solvent-induced phase separation (NIPS) method. However, the residual organic solvents would unavoidably limit the application of PLA perforated membrane in biomedical and high-end water purification fields. Herein, an innovative solution-free method was proposed for preparing the PLA perforated membrane via a simple and environmentally friendly way. We have successfully fabricated the PLA perforated membrane using a physical foaming technique with CO₂ as the blowing agent. By tuning the primary film thickness, saturation pressure, and foaming temperature, PLA perforated membrane's cell morphology could be accordingly adjusted. The PLA perforated membrane with a highly-ordered straight pore channel and high open cell content (OCC) approximately 72% was obtained under a mild condition. The formation mechanism of the PLA perforated membrane was discussed via the interaction of crystallization behavior and gas diffusion process. This green and solvent-free PLA perforated membrane possesses great potential for use in areas like the tissue engineering and high-end water purification.