Adsorption of U(VI) on the natural soil around a very low-level waste repository
Jingjing Wang1, Shirong Qiang2, Yun Wang3
1School of Nuclear Science and Technology, Lanzhou University, Lanzhou, 730000, China; Northwest Institute of Eco-Environment and Resources, Chinese Academy of Sciences, Lanzhou, 730000, China.
Abstract:
The behaviors of U(VI) in environmental media around radioactive waste disposal site are important for safety assessment of geological repositories. However, the estimation of environmental behaviors of U(VI) in natural media was insufficient. This work aimed to determine the adsorption of U(VI) on natural soil surrounding a candidate very low-level radioactive waste (VLLW) disposal site in southwest China. Results showed that the adsorption process of U(VI) on soils could be well supported by pseudo-second-order kinetic and Freundlich model. The adsorption of U(VI) was pH-dependent but temperature-independent. High ionic strength (NaCl) strongly affected the adsorption process at low pH (2.0-5.5). CO32- remarkably inhibited the U(VI) adsorption, while the adsorption of U(VI) was promoted by PO43- and SO42-. Naturally occurred soil organic matters (SOMs) showed high affinity for U(VI), while the presence of additional humic acid (HA) strongly inhibited U(VI) adsorption. The occurrence of ferrous iron could result in the reduction of U(VI) at low pH values (pH < 4), leading to the promotion of immobilization of U(VI). These findings would provide some guidance for the safety assessments of the VLLW disposal as well as the remediation of contaminated soil.
More Related Videos
09:23Removal of Trace Elements by Cupric Oxide Nanoparticles from Uranium In Situ Recovery Bleed Water and Its Effect on Cell Viability
Published on: June 21, 2015
12:22Speciation and Bioavailability Measurements of Environmental Plutonium Using Diffusion in Thin Films
Published on: November 9, 2015
Related Concept Videos
Voltammetry: Stripping Methods
Anodic Stripping Voltammetry (ASV)
ASV is used to determine metals and metalloids at trace levels. It involves two steps: deposition and stripping. First, a negative potential is applied to the...
Bioremediation
