[Numerical study on the effect of middle ear malformations on energy absorbance]

In order to study the effect of middle ear malformations on energy absorbance, we constructed a mechanical model that can simulate the energy absorbance of the human ear based on our previous human ear finite element model. The validation of this model was confirmed by two sets of experimental data. Based on this model, three common types of middle ear malformations, i. e. incudostapedial joint defect, incus fixation and malleus fixation, and stapes fixation, were simulated by changing the structure and material properties of the corresponding tissue. Then, the effect of these three common types of middle ear malformations on energy absorbance was investigated by comparing the corresponding energy absorbance. The results showed that the incudostapedial joint defect significantly increased the energy absorbance near 1 000 Hz. The incus fixation and malleus fixation dramatically reduced the energy absorbance in the low frequency, which made the energy absorbance less than 10% at frequencies lower than 1 000 Hz. At the same time, the peak of energy absorbance shifted to the higher frequency. These two kinds of middle ear malformations had obvious characteristics in the wideband acoustic immittance test. In contrast, the stapes fixation only reduced the energy absorbance in the low frequency and increased energy absorbance in the middle frequency slightly, which had no obvious characteristic in the wideband acoustic immittance test. These results provide a theoretical reference for the wideband acoustic immittance diagnosis of middle ear malformations in clinic.