Related Experiment Video

Updated: Nov 8, 2025

Comparison of Scale in a Photosynthetic Reactor System for Algal Remediation of Wastewater
05:40

Comparison of Scale in a Photosynthetic Reactor System for Algal Remediation of Wastewater

Published on: March 6, 2017

9.2K

The performance evaluation of wastewater service: a protocol based on performance indicators applied to sewer systems

Maria Cristina Collivignarelli1,2, Sara Todeschini1,2, Alessandro Abbà3

  • 1Department of Civil Engineering and Architecture, University of Pavia, Pavia, Italy.

Environmental Technology
|April 26, 2021
PubMed

Keywords:
BenchmarkingEnvironmental qualityPerformance indicatorsSewer systemSustainable management

More Related Videos

Wastewater Irrigation Impacts on Soil Hydraulic Conductivity: Coupled Field Sampling and Laboratory Determination of Saturated Hydraulic Conductivity08:09

Wastewater Irrigation Impacts on Soil Hydraulic Conductivity: Coupled Field Sampling and Laboratory Determination of Saturated Hydraulic Conductivity

Published on: August 19, 2018

9.4K
Mesocosm-Scale Constructed Wetland Design for Wastewater Treatment08:24

Mesocosm-Scale Constructed Wetland Design for Wastewater Treatment

Published on: May 2, 2025

560

Related Concept Videos

Testing Water Quality01:14

Testing Water Quality

When the quality of water for concrete preparation is uncertain, its impact on the setting time of cement and compressive strength of mortar is assessed by comparison with de-ionized or distilled water benchmarks. American Society for Testing and Materials (ASTM) C1602 requires the setting times to be within 90 minutes of the control, British Standard (BS) 3146:1980 allows a 30-minute variance in the initial setting, while British Standards European Norm (BS EN) 1008 specifies initial setting...
242
Weir: Problem Solving01:26

Weir: Problem Solving

Water flow in open channels is often measured using hydraulic structures such as weirs, which allow precise calculation of discharge. In a rectangular channel, flow rates are measured using three types of weirs: rectangular sharp-crested, triangular sharp-crested, and broad-crested. The weir head is set at a fixed height above the channel bottom, simplifying calculations and enabling the relationship between depth and flow rate to be analyzed.For the rectangular sharp-crested weir, the flow...
191
Nursing Evaluation01:15

Nursing Evaluation

The evaluation stage signals the end of the nursing process. The nurse gathers evaluative data to assess whether or not the patient has attained the expected results. Whereas the nurse collects data in the nursing assessment to identify the patient's health concerns, the evaluation stage data determines if the indicated health issues are resolved. Evaluative data collection includes two sections: the data acquired to evaluate patient outcomes and the time criteria for data collection.
3.9K
Environmental Applications of Microorganisms01:30

Environmental Applications of Microorganisms

Microorganisms play a pivotal role in maintaining ecosystem balance by recycling essential elements such as carbon, nitrogen, and phosphorus, as well as supporting processes like bioremediation, wastewater treatment, and biofuel production.Microbes in Elemental CyclesIn the carbon cycle, microorganisms decompose organic matter, releasing carbon dioxide via aerobic respiration. This carbon dioxide is subsequently used by photosynthetic organisms to synthesize organic compounds, closing the...
564
Pipe Flowrate Measurement01:28

Pipe Flowrate Measurement

In pipe flow measurement, orifice, nozzle, and Venturi meters are commonly used to determine fluid flowrates by constricting the flow area, which increases fluid velocity and reduces pressure. This pressure difference, governed by Bernoulli's principle and adjusted for real-world conditions, is essential for calculating flowrate. Each meter type is suited to specific applications based on accuracy, efficiency, and compatibility with various flow conditions.
The orifice meter is a simple,...
912
Quality of Water01:19

Quality of Water

In concrete preparation, the quality of water is paramount as it affects the strength and durability of the concrete. Potable water is usually preferred; however, it must not have excessive sodium or potassium to prevent compromising the concrete's integrity. Water quality is typically evaluated based on impurities such as dissolved solids, chlorides, and sulfates, and its pH value is ideally between 6 and 8. Even slightly acidic natural water may be acceptable unless it contains harmful...
351