Related Experiment Video
Updated: Nov 7, 2025

Fabrication of Carbon Nanotube High-Frequency Nanoelectronic Biosensor for Sensing in High Ionic Strength Solutions
Published on: July 22, 2013
Performance Optimization of Nitrogen Dioxide Gas Sensor Based on Pd-AlGaN/GaN HEMTs by Gate Bias Modulation
Van Cuong Nguyen1, Kwangeun Kim2, Hyungtak Kim1
1School of Electronic and Electrical Engineering, Hongik University, Seoul 04066, Korea.
Abstract:
We investigated the sensing characteristics of NO2 gas sensors based on Pd-AlGaN/GaN high electron mobility transistors (HEMTs) at high temperatures. In this paper, we demonstrated the optimization of the sensing performance by the gate bias, which exhibited the advantage of the FET-type sensors compared to the diode-type ones. When the sensor was biased near the threshold voltage, the electron density in the channel showed a relatively larger change with a response to the gas exposure and demonstrated a significant improvement in the sensitivity. At 300 °C under 100 ppm concentration, the sensor's sensitivities were 26.7% and 91.6%, while the response times were 32 and 9 s at VG = 0 V and VG = -1 V, respectively. The sensor demonstrated the stable repeatability regardless of the gate voltage at a high temperature.
Related Concept Videos
Biasing of P-N Junction
In equilibrium, no external voltage is applied across the p-n junction. The depletion region is formed at the junction interface due to the diffusion of carriers, which leaves behind charged dopants, acceptors on the p-side, and donors on the n-side. These immobile charges create an electric field that prevents further diffusion of carriers. The related energy band...
Biasing of Metal-Semiconductor Junctions
In Schottky junctions, where the semiconductor is n-type, applying a positive voltage to the metal relative to the semiconductor reduces its Fermi...
Biasing of FET
In an N-channel JFET, the structure consists of N-type material forming the channel on a P-type substrate, with the...
PD Controller: Design
Designing a continuous-data controller requires selecting and linking components like adders and integrators, which are fundamental in Proportional,...

