Related Experiment Video
Updated: Nov 7, 2025

A Polymer-based Piezoelectric Vibration Energy Harvester with a 3D Meshed-Core Structure
Published on: February 20, 2019
Design and Properties Analysis of Novel Modified 1-3 Piezoelectric Composite
Jiacheng Wang1, Chao Zhong1, Shaohua Hao2
1Beijing Key Laboratory for Sensor, Beijing Information Science & Technology University, Beijing 100101, China.
Abstract:
With the increasing demand for energy exchangers in underwater acoustic equipment, a modified 1-3 piezoelectric composite material is fabricated based on three-component phases. The new material outperforms the traditional two-phase 1-3 structure. Flexible silicone rubber polymer strengthened the piezoelectric composite and the properties of modified 1-3 piezoelectric composite have been tested by method of finite element simulation and experiment, respectively. This modified material has a high electromechanical coupling coefficient; the maximum can reach 0.684 and -3 dB bandwidth is superior to the two-phase 1-3 type. At the same time, the modified phase 1-3 type structure has an excellent decoupling effect. Silicone rubber can reduce the negative coupling vibration of epoxy resin, the vibration model simplification of piezoelectric composite, and the result of the experiment and simulation has good consistency.
More Related Videos
10:39Fabrication and Characterization of Thickness Mode Piezoelectric Devices for Atomization and Acoustofluidics
Published on: August 5, 2020
07:44Characterization of Full Set Material Constants and Their Temperature Dependence for Piezoelectric Materials Using Resonant Ultrasound Spectroscopy
Published on: April 27, 2016