Optimal Energy Management Framework for Truck-Mounted Mobile Charging Stations Considering Power Distribution System
1School of Electrical and Electronics Engineering, Chung-Ang University, 84 Heukseok-ro, Dongjak-gu, Seoul 156-756, Korea.
Abstract:
A high charging demand from many electric vehicles (EVs) at a fixed charging station (FCS) with a limited number of charging poles can increase the waiting time of EVs and yield an abnormal power grid condition. To resolve these challenges, this paper presents an optimization framework in which a mobile charging station (MCS) is dispatched to the overloaded FCS to reduce the number of waiting EVs while maintaining normal power grid operation. Compared to existing MCS scheduling methods that do not consider actual power distribution system operations, the proposed framework takes into account the (i) active/reactive power flow and consumption of EVs, (ii) reactive power capability of MCS, and (iii) voltage quality in power distribution systems. In coupled transportation and power distribution systems, the proposed algorithm conducts optimal operation scheduling of MCS for both road routing and charging and discharging, thereby leading to the reduction of waiting EVs within the allowable voltage range. The proposed MCS optimization algorithm was tested in IEEE 13-bus and 33-bus distribution systems coupled with 9-node and 15-node transportation systems, respectively. The test results demonstrate the effectiveness of the proposed algorithm in terms of number of waiting EVs, voltage magnitude deviation, and reactive power of the MCS.
Related Concept Videos
Maximum Power Flow and Line Loadability
Transformers in Distribution System
Distribution substation transformers come in various ratings and typically use mineral oil for insulation and cooling. To prevent moisture and air from entering the oil, some transformers use an inert gas like nitrogen to fill the...
The Power Flow Problem and Solution
Power System Distribution
The transmission system is designed...
Control of Power Flow
Secondary Distribution
In residential areas, 120/240 V single-phase, three-wire service is commonly used for lighting, outlets, and large appliances. Urban areas with high-density loads...


