Related Experiment Video
Updated: Nov 7, 2025

Cutting Procedures, Tensile Testing, and Ageing of Flexible Unidirectional Composite Laminates
Published on: April 27, 2019
Numerical Investigation on the Transverse Vibration of Prestressed Large-Span Beams with Unbonded Internal Straight
Mohammad Reza Ghaemdoust1,2, Feiliang Wang1,2, Siping Li1,2
1State Key Laboratory of Ocean Engineering, Shanghai Jiao Tong University, Shanghai 200240, China.
Abstract:
This paper deals with the effect of the prestress load on the free and forced dynamic behavior and vertical vibration of the prestressed beams. The analysis applies both the analytical frequency equation and the finite element method (FEM) using ABAQUS software to predict the fundamental natural frequency (FNF) of the simply supported unbonded prestressed beams. The energy method has been employed to derive the effective prestressing load to determine the eccentricity effect. In regard to the forced response of the prestressed beam, a moving point load with a constant value and various velocities and excitation frequencies is applied. Extensive parametric studies are carried out taking into account different factors including prestress load, eccentricity, concrete ratio, span-to-depth ratio, velocity, and frequency of the moving load. The comparison of the FNFs obtained by the formula with those obtained from FEM models indicates that the results are in a good agreement. This convergence demonstrates that the proposed formulation can predict the FNF of the eccentrically prestressed beams with high reliability. The time-histories curves for midspan displacement of the unbonded prestressed beams and the dynamic magnification factors are also evaluated. The results illustrate that the aforementioned factors have an indispensable contribution to the beam dynamic behavior.
Related Concept Videos
Deformation of a Beam under Transverse Loading
The insights from the bending moment diagram extend to...
Distribution of Stresses in a Narrow Rectangular Beam
Beams with Unsymmetric Loadings
The first moment-area theorem determines the slope at any point on the beam. This theorem indicates that the change in slope between two points on a beam...
Principal Stresses in a Beam
Analyzing principal stresses is crucial, especially in...
Shearing Stresses in a Beam: Problem Solving
Internal Loadings in Structural Members: Problem Solving
To illustrate this, let's consider a beam OC of 5 kN, inclined at an angle of 53.13° with the horizontal and supported at both ends. Determine the internal...

