Related Experiment Video
Updated: Nov 6, 2025

Laryngeal Mask Airway LMA Placement in a Neonatal Patient Simulator Using a Non-Inflatable Supraglottic Airway SGA
Published on: July 14, 2023
Asynchrony During Pediatric Noninvasive Ventilation With a Nasal Cannula Interface: A Lung Model Study
Scott R Studeny1, Robert L Chatburn2, Wei Liu3
1Pediatric Critical Care Department, Pediatric Institute, Cleveland Clinic Foundation, Cleveland, Ohio. studens@ccf.org.
Background:
Pediatric noninvasive ventilation (NIV) is used commonly in the acute care setting and is associated with high incidence of patient ventilator asynchrony.
Methods:
An ASL 5000 breathing simulator was used to model pediatric patients with varying patient efforts and lung conditions. For delivery of NIV, a commonly used acute care ventilator was used by connecting a nasal cannula interface to model nares produced with a 3-dimensional printer. The modes of ventilation were NIV pressure control continuous mandatory ventilation and NIV pressure control continuous spontaneous ventilation. Patient and ventilator waveforms were analyzed using the ASL 5000 software to assess for asynchrony events and determine the asynchrony index (AI).
Results:
Significant asynchrony (AI > 0.1) existed in the majority of scenarios for both pressure control continuous mandatory ventilation and pressure control continuous spontaneous ventilation (79% and 93%, respectively). The most common asynchrony event was ineffective trigger, accounting for 81.9% of events in pressure control continuous mandatory ventilation and 79.3% in pressure control continuous spontaneous ventilation. There were no statistically significant differences in the AI when comparing simulated patient effort or lung condition.
Conclusions:
Significant asynchrony exists during NIV with a commonly used acute care ventilator and nasal cannula interface, which raises questions regarding its utility in clinical practice in the pediatric population.
Related Concept Videos
Mechanical Ventilation III: Noninvasive Ventilation
Noninvasive Positive-Pressure Ventilation...
Oxygen Delivering System I: Nasal Cannula and Face Mask
Nasal Cannula
A nasal cannula is a lightweight tube split at one end into two prongs and placed in the nostrils. It is typically used to deliver low to medium levels of oxygen.
Suggested flow rate: The suggested flow rate for a nasal cannula typically ranges between 1 and 6 L/min.
Oxygen percentage setting:...
Mechanical Ventilation II: Invasive Ventilation
Negative-Pressure Ventilators
Negative-pressure ventilators create a vacuum around the chest or body to draw air into the lungs, simulating breathing. This method does not require an...
Suctioning the Nasopharyngeal Airway
Equipment Required
Oxygen Delivering System II: Venturi Mask and Transtracheal Oxygen
Venturi Mask
The Venturi mask, named after the Venturi effect, is designed to deliver precise oxygen concentrations. It consists of a large tube with an oxygen inlet that narrows down, causing a pressure drop that pulls air in through adjustable side ports. The mask is a lightweight,...
Administering Oxygen by Nasal Cannula
Nasal Cannulas
A nasal cannula is a lightweight tube split into two prongs placed in the nostrils,...

