Fe-Ti bimetal oxide adsorbent for removing low concentration H₂S at room temperature

ABSTRACTHerein, a series of Fe-Ti bimetal oxide adsorbents were prepared by reduction-co-precipitation method, and their performance in removing low concentration H₂S at room temperature was investigated. The adsorbents were characterized by X-Ray diffraction (XRD), Scanning electron microscopy (SEM), Fourier transform infrared spectroscopy (FT-IR), Ultraviolet Visible diffuse reflectance spectroscopy (UV-Vis-DRS), X-Ray photoelectron spectroscopy (XPS) and N₂ adsorption-desorption. The results showed that the addition of Ti increased the specific surface area, pore volume and small oligomeric Fe₂O₃ of ferrihydrite. When the Fe/Ti molar ratio was 8:1, Fe-Ti bimetal oxide formed a large amount of oligomeric Fe₂O₃, and its specific surface area and pore volume reached 344.99 m²/g and 0.34 cm³/g, respectively. At this time, Fe-Ti bimetal oxide exhibited the highest breakthrough sulfur capacity of 222.8 mg/g. High temperature calcination caused Fe-Ti bimetal oxide to form small specific surface area and pore volume, and produced crystalline α-Fe₂O₃. And the breakthrough sulfur capacity of Fe-Ti bimetal oxide decreased with the increasing calcination temperature. In addition, the desulfurization process conformed to the unreacted shrinking nucleus model.