Shape memory alloy-driven undulatory locomotion of a soft biomimetic ray robot

The objective of this study was to imitate undulatory motion, which is a commonly observed swimming mechanism of rays, using a soft morphing actuator. To achieve the undulatory motion, an artificial muscle built with shape memory alloy-based soft actuators was exploited to control the shape-changing behavior of a soft fin membrane. Artificial undulating fins were divided into two categories according to the method of generating the wave motion: single and multiple actuator-driven fins. For empirical research on the transformation and propulsion behavior of each fin type, the design and construction of bound propulsors were undertaken to mimic the structural and behavioral aspects of animals. To visualize the effect of undulatory motion on the swimming efficiency test of the fin beat frequency, a simplified soft undulating fin with a rectangular propulsor was constructed and tested. Additionally, dynamic modeling of the fin tip in wave-traveling was conducted for comparison and optimization. To optimize the thrust and propulsion efficiency of robot speed, the effects of the wave amplitude control and actuator sequence on the fin behavior were examined. An untethered robot was constructed according to the experimental results of the propulsors. Both exhibited exceptional swimming efficiency and maneuverability. The multiple actuator-driven ray robot exhibited a maximum swimming speed of 0.25 body lengths per second which is almost a similar swimming speed with previously reported robots. The developed robot achieved directional swimming (forward and backward) and turning (including rotation). Underwater exploration in an artificial environment was performed using the robot.