Use of cone-beam computed tomography for advanced imaging of the equine patient

Access to volumetric imaging modalities, such as magnetic resonance imaging (MRI) and computed tomography (CT), has increased over the past decade and has revolutionised the way clinicians evaluate equine anatomy. More recent advancements have resulted in the development of multiple commercially available cone-beam CT (CBCT) scanners for equine use. CBCT scanners modify the traditional fan-shaped beam of ionising radiation into a three-dimensional pyramidal- or cone-shaped beam of radiation. This modification enables the scanner to acquire sufficient data to create diagnostic images of a region of interest after a single rotation of the gantry. The rapid acquisition of data and divergent X-ray beam causes some artifacts to be more prominent on CBCT images-as well as the unique cone-beam artifact-resulting in decreased contrast resolution. While the use of CT for evaluation of the equine musculoskeletal anatomy is not new, there is a paucity of literature and scientific studies on the capabilities of CBCT for equine imaging. CBCT units do not require a specialised table for imaging and in some cases are portable for imaging in the standing or anaesthetised patient. This review article summarises the basic physics of CT technology, including how CBCT imaging differs, and provides objective information about the strengths and limitations of this modality. Finally, potential future applications and techniques for imaging with CT which will need to be explored in order to fully consider the capabilities of CT imaging in the horse are discussed.