Related Experiment Video

Updated: Nov 4, 2025

Imaging Corrosion at the Metal-Paint Interface Using Time-of-Flight Secondary Ion Mass Spectrometry
07:24

Imaging Corrosion at the Metal-Paint Interface Using Time-of-Flight Secondary Ion Mass Spectrometry

Published on: May 6, 2019

8.5K

A Novel Application of EIS for Quantitative Coating Quality Assessment During Neutral Salt Spray Testing of

Marina Mrda Lalic, Sanja Martinez

    Acta Chimica Slovenica
    |May 31, 2021
    PubMed

    More Related Videos

    Metal Corrosion and the Efficiency of Corrosion Inhibitors in Less Conductive Media10:05

    Metal Corrosion and the Efficiency of Corrosion Inhibitors in Less Conductive Media

    Published on: November 3, 2018

    18.1K
    Determining the Chemical Composition of Corrosion Inhibitor/Metal Interfaces with XPS: Minimizing Post Immersion Oxidation07:44

    Determining the Chemical Composition of Corrosion Inhibitor/Metal Interfaces with XPS: Minimizing Post Immersion Oxidation

    Published on: March 15, 2017

    15.9K

    Related Concept Videos

    Electrogravimetric Analysis: Overview01:30

    Electrogravimetric Analysis: Overview

    Electrogravimetric analysis measures the weight of an analyte deposited electrolytically onto a suitable working electrode. This method involves applying a potential to a pre-weighed electrode submerged in a solution, which results in the desired substance being deposited through reduction at the cathode or oxidation at the anode. The electrode's weight is recorded after deposition, and the difference in weight gives the analyte's weight in the solution.
    To test the completeness of the...
    450
    Testing Water Quality01:14

    Testing Water Quality

    When the quality of water for concrete preparation is uncertain, its impact on the setting time of cement and compressive strength of mortar is assessed by comparison with de-ionized or distilled water benchmarks. American Society for Testing and Materials (ASTM) C1602 requires the setting times to be within 90 minutes of the control, British Standard (BS) 3146:1980 allows a 30-minute variance in the initial setting, while British Standards European Norm (BS EN) 1008 specifies initial setting...
    241
    Electrodeposition01:08

    Electrodeposition

    Electrodeposition is a technique used to separate an analyte from interferents by electrochemical processes. Here, the analyte is a metal ion that can be deposited on an electrode immersed in the sample solution. The electrochemical setup consists of an anode and a cathode. When an electric current is applied to the setup, oxidation occurs at the anode. At the cathode, which consists of a large metal surface, metal ions undergo reduction and deposit onto the surface.
    Electrodeposition can...
    868
    Interfacial Electrochemical Methods: Overview01:06

    Interfacial Electrochemical Methods: Overview

    Interfacial electrochemical methods focus on the phenomena occurring at the boundary between an electrode and a solution, as opposed to bulk methods that concentrate on the solution's overall properties. These interfacial methods are classified as either static or dynamic based on the presence of a nonzero current in the electrochemical cell and the consistency of analyte concentrations. Static methods, such as potentiometry, measure the cell's potential without any significant current...
    548