Tensile Strength Prediction of Short Fiber Reinforced Composites

Essentially, every failure of a short fiber reinforced composite (SFRC) under tension is induced from a matrix failure, the prediction of which is of fundamental importance. This can be achieved only when the homogenized stresses of the matrix are converted into true values in terms of stress concentration factors (SCFs) of the matrix in an SFRC. Such an SCF cannot be determined in the classical way. In this paper, a closed-form formula for the longitudinal tensile SCF in the SFRC is derived from the matrix stresses determined through an elastic approach. The other directional SCFs in an SFRC are the same as those in a continuous fiber composite already available. A bridging model was used to calculate the homogenized stresses explicitly, and a failure prediction of the SFRC with arbitrary fiber aspect ratio and fiber content was made using only the original constituent strength data. Results showed that the volume fraction, the aspect ratio, and the orientation of the fiber all have significant effect on the tensile strength of an SFRC. In a certain range, the tensile strength of an SFRC increases with the increase in fiber aspect ratio and fiber volume content, and the strength of the oriented short fiber is higher than that of the random short fiber arrangement. Good correlations between the predicted and the available measured strengths for a number of SFRCs show the capability of the present method.