Related Experiment Video
Updated: Nov 3, 2025

Characterization of Thermal Transport in One-dimensional Solid Materials
Published on: January 26, 2014
Approximately Model of the Maximum Temperature on the Chip Surface
1Faculty of Mechanical Engineering, Opole University of Technology, 45-271 Opole, Poland.
Abstract:
This article presents an approximately model that allows for the determination of the maximum temperature of the chip surface in dry orthogonal turning. The mathematical formula describing the maximum temperature of the chip surface was formulated based on experimental data. The experiments were carried out for orthogonal cutting of austenitic steel AISI 321 with flat rake face carbide inserts that were made of tungsten carbide H10F, both uncoated and coated, with coatings of varied arrangement. Thermographic images of the cutting zone were used to verify the correctness of the approximately model. The obtained results show good agreement between the modelling results and experimental studies. The discrepancy of the maximum temperature values of the top surface of the chip does not exceed 6.4%.
Related Concept Videos
Mechanism of heat transfer
Mechanisms of Heat Transfer II
Temperature and Thermal Equilibrium
The concept of temperature has evolved from the common concepts of hot and cold. The scientific definition of temperature explains more than just our sense of hot and cold. Temperature is operationally defined as the quantity measured with a thermometer. Furthermore, temperature is...
Mechanisms of Heat Transfer I
Mechanisms of Heat Transfer
Conduction, accounting for approximately 3% of body heat loss at rest, is the process of exchanging heat between molecules of two materials in direct contact. This can result in both heat loss and gain. For instance, when the body is submerged in water, which conducts heat 20 times more effectively than air, it can either lose or gain significant...
Quantifying Heat

