Near-Surface Mounted Reinforcement of Sawn Timber Beams-FEM Approach

The demand for timber has increased significantly in recent years. Therefore, reliable tools are needed to predict the mechanical properties of sawn timber, especially for structural applications. Very complex models require a lot of input data for analysis, which cannot always be guaranteed, especially in industrial practice. Thus, a simplified model for material description was developed and assessed with experiments (static bending tests carried out in accordance with the guidelines suggested in the European standard EN 408) and an analytical approach (gamma method according to the guidelines given in the European standard EN 1995). The effective stiffness was calculated as a major parameter, which has an influence on the elements' behavior. The model included a near-surface mounted (NSM) local reinforcement technique, with CFRP strips of Scots pine timber beams being subjected to bending stresses. It is anticipated that the developed model can be a starting point for the repair engineering field, contributing to decision-making regarding conservation technique selection and range. Next, improvements of the model will provide more and more realistic results for numerical analysis in terms of the obtained failure mechanisms for sawn timber elements.