Related Experiment Video
Updated: Nov 3, 2025
Generating Lap Joints Via Friction Stir Spot Welding on DP780 Steel
Published on: August 13, 2019
Experimental Investigation of the Friction Stir Weldability of AA8006 with Zirconia Particle Reinforcement and
Thanikodi Sathish1, Abdul Razak R Kaladgi2, V Mohanavel3
1Department of Mechanical Engineering, Saveetha School of Engineering, Saveetha Institute of Medical and Technical Sciences (SIMATS), Chennai 602105, Tamil Nadu, India.
Abstract:
A lightweight, highly corrosive resistant, and high-strength wrought alloy in the aluminum family is the Aluminium 8006 alloy. The AA8006 alloy can be formed, welded, and adhesively bonded. However, the recommended welding methods such as laser, TIG (Tungsten Inert Gas welding), and ultrasonic are more costly. This investigation aims to reduce the cost of welding without compromising joint quality by means of friction stir welding. The aluminum alloy-friendly reinforcement agent zirconia is utilized as particles during the weld to improve the performance of the newly identified material AA8006 alloy in friction stir welding (FSW). The objectives of this research are to identify the level of process parameters for the friction stir welding of AA8006 to reduce the variability by the trial-and-error experimental method, thereby reducing the number of samples needing to be characterized to optimize the process parameters. To enhance the quality of the weld, the friction stir processing concept will be adapted with zirconia reinforcement during welding. The friction stir-processed samples were investigated regarding their mechanical properties such as tensile strength and Vickers microhardness. The welded samples were included in the corrosion testing to ensure that no foreign corrosive elements were included during the welding. The quality of the weld was investigated in terms of its surface morphology, including aspects such as the dispersion of reinforced particles on the welded area, the incorporation of foreign elements during the weld, micro defects or damage, and other notable changes through scanning electron microscopy analysis. The process of 3D profilometry was employed to perform optical microscopy investigation on the specimens inspected to ensure their surface quality and finish. Based on the outcomes, the optimal process parameters are suggested. Future directions for further investigation are highlighted.
