Wax-Transferred Hydrophobic CVD Graphene Enables Water-Resistant and Dendrite-Free Lithium Anode toward Long Cycle...

One of the key challenges in achieving practical lithium-air battery is the poor moisture tolerance of the lithium metal anode. Herein, guided by theoretical modeling, an effective tactic for realizing water-resistant Li anode by implementing a wax-assisted transfer protocol is reported to passivate the Li surface with an inert high-quality chemical vapor deposition (CVD) graphene layer. This electrically conductive and mechanically robust graphene coating enables serving as an artificial solid/electrolyte interphase (SEI), guiding homogeneous Li plating/stripping, suppressing dendrite and "dead" Li formation, as well as passivating the Li surface from moisture erosion and side reactions. Consequently, lithium-air batteries fabricated with the passivated Li anodes demonstrate a superb cycling performance up to 2300 h (230 cycles at 1000 mAh g^-1 , 200 mA g^-1 ). More strikingly, the anode recycled thereafter can be recoupled with a fresh cathode to continuously run for 400 extended hours. Comprehensive time-lapse and ex situ microscopic and spectroscopic investigations are further carried out for elucidating the fundamentals behind the extraordinary air and electrochemical stability.