Pyrolysis and Combustion Chemistry of Pyrrole, a Reference Component for Bio-oil Surrogates: Jet-Stirred Reactor
Matteo Pelucchi1, Suphaporn Arunthanayothin2, Yu Song2,3
1CRECK Modeling Lab, Department of Chemistry Materials and Chemical Engineering, Politecnico di Milano, 20133 Milano, Italy.
Abstract:
Fast-pyrolysis bio-oils (FPBOs) obtained from lignocellulosic biomass are gaining attention as sustainable fuels for various applications, including the transport sector and power production. A significant fraction of bio-oils is constituted by nitrogen-containing compounds (N fuels) that should be considered when developing surrogate models for FPBOs. Moreover, the content of N fuels in FPBOs is expected to strongly contribute to the production of nitrogen oxides (NO ) directly from fuel-bound nitrogen (fuel NO ), in addition to the thermal NO formation pathways typical of high-temperature combustion conditions. This work investigates the pyrolysis and combustion chemistry of pyrrole (C4H5N), a candidate reference fuel component for FPBO surrogate models. Speciation measurements in an atmospheric pressure jet-stirred reactor have been performed for both pyrolysis and oxidation conditions. Pyrolysis experiments have been performed for 1% pyrrole/helium mixtures over the temperature range T = 925-1200 K. Oxidation experiments were carried out for 1% pyrrole/oxygen/helium mixtures at three equivalence ratios (φ = 0.5, 1.0, and 2.0) over the temperature range T = 700-1200 K. These new data significantly extend the number of experimental targets for kinetic model validation available at present for pyrrole combustion. After a thorough revision of previous theoretical and kinetic modeling studies, a preliminary kinetic model is developed and validated by means of comparison to new experimental data and those previously reported in the literature. The rate of production and sensitivity analyses highlight important pathways deserving further investigations for a better understanding of pyrrole and, more in general, N fuel combustion chemistry. A critical discussion on experimental challenges to be faced when dealing with pyrrole is also reported, encouraging further experimental investigation with advanced diagnostics.
More Related Videos
07:24Combustion Chemistry of Fuels: Quantitative Speciation Data Obtained from an Atmospheric High-temperature Flow Reactor with Coupled Molecular-beam Mass Spectrometer
Published on: February 19, 2018
07:49On-line Analysis of Nitrogen Containing Compounds in Complex Hydrocarbon Matrixes
Published on: August 5, 2016
Related Concept Videos
Combustion Energy: A Measure of Stability in Alkanes and Cycloalkanes
Alkanes undergo combustion in the presence of excess oxygen and high-temperature conditions to give carbon dioxide and water. A combustion reaction is the energy source in natural gas, liquified...
Enthalpy and Heat of Reaction
Flame Photometry: Overview
Aromatic Compounds: Overview
In 1825, Faraday isolated...
Flame Photometry: Lab
Predicting Reaction Outcomes
