Related Experiment Video
Updated: Nov 2, 2025

Microfluidic Devices for Characterizing Pore-scale Event Processes in Porous Media for Oil Recovery Applications
Published on: January 16, 2018
Propagation and Entrapment of Hydrocarbons in Porous Media under Capillarity Controlled Phase-Alteration Conditions:
Ilyas Al-Kindi1, Tayfun Babadagli1
17-203 Donadeo Innovation Centre for Engineering, University of Alberta, 9211-116 Street NW, Edmonton, Alberta T6G 1H9, Canada.
Abstract:
The displacement characteristics of gas-liquid systems in capillary media under nonisothermal and nonisobaric conditions are controlled by capillarity as phase alteration (specifically vaporization) starts earlier in smaller (nano)capillaries compared to the larger ones. For an accurate modeling of these types of natural and engineered processes, this thermodynamically dictated displacement process should be well understood. With this aim, the capillarity effect on phase change and the displacement dynamics of hydrocarbon liquids in homogeneous and heterogenous silicate microfluidics chips was studied. It was observed that the boiling temperatures of pentane, a pentane-heptane mixture, and a pentane-heptane-octane mixture were 1.6-6.9% lower than bulk measurements due to confinement effects, and the early vaporization had a significant influence on the vapor displacement process. In homogeneous (uniform capillary pressure distribution) porous media, the consistency of capillary pressure resulted in a uniform and quicker propagation/displacement of vapor. However, in the media with variable capillary pressure (heterogeneous pore structure), the vapor's flow tended to take place nonuniformly along the system, thus leading to a major gas fingering and gas-flow restriction. The presence of other-heavier-components (liquid phase) in the porous medium developed an excessive barrier against the vapor's flow throughout the pore channels that was specifically caused by the viscous forces of the liquids. Moreover, it was observed that the existence of liquids with high boiling points contribute to slowing the vapor propagation of the lighter components, and the gas displacement becomes slower as the density and viscosity of the liquid-phase components increases.
More Related Videos
10:06Microfluidic Fabrication Techniques for High-Pressure Testing of Microscale Supercritical CO2 Foam Transport in Fractured Unconventional Reservoirs
Published on: July 2, 2020
08:02Reservoir Condition Pore-scale Imaging of Multiple Fluid Phases Using X-ray Microtomography
Published on: February 25, 2015