Facile and simple fabrication of superhydrophobic and superoleophilic MS/PDA/DT sponge for efficient oil/water separation

To overcome the problems of frequent leakage accidents during oil exploitation, a superhydrophobic and superoleophilic porous MS/PDA/DT sponge was successfully prepared via mild solvent evaporation method, and a polydopamine assisted surface coating of 1-dodecanethiol (DT) on a melamine sponge (MS) substrate. Surface structure and performance of the MS/PDA/DT sponge were characterized by Scanning Electron Microscope (SEM), Fourier transform infrared spectrometer (FTIR), and Video Optical Contact Angle (CA) metre. The results showed that the as-prepared MS/PDA/DT sponge has a high-water contact angle (WCA) of 147.2°, which is probably attributed to both the rough surface derived from in situ growth and the low surface energy due to grafting of hydrophobic 1-dodecanethiol. The durability of the as-constructed MS/PDA/DT sponge was studied by repeated abrasion tests. After 50 abrasion cycles, the superhydrophobicity of the MS/PDA/DT sponge good mechanical durability. The MS/PDA/DT sponge can effectively absorb oil with an absorption capacity of up to 24 times its weight. The superhydrophobic and superoleophilic MS/PDA/DT sponge has the potential as a promising adsorbent for oil/water separation.Highlights The MS/PDA/DT sponge was prepared via the mild solvent evaporation method.The contact angle of the MS/PDA/DT sponge was 147.2^o.The adsorption capacity of the MS/PDA/DT sponge was 24 times their weight.The cost-efficient, environmentally friendly porous materials show high oil/water separation efficiency.