Emission source-based ozone isopleth and isosurface diagrams and their significance in ozone pollution control...

In the past decade, ozone (O₃) pollution has been continuously worsening in most developing countries. The accurate identification of the nonlinear relationship between O₃ and its precursors is a prerequisite for formulating effective O₃ control measures. At present, precursor-based O₃ isopleth diagrams are widely used to infer O₃ control strategy at a particular location. However, there is frequently a large gap between the O₃-precursor nonlinearity delineated by the O₃ isopleths and the emission source control measures to reduce O₃ levels. Consequently, we developed an emission source-based O₃ isopleth diagram that directly illustrates the O₃ level changes in response to synergistic control on two types of emission sources using a validated numerical modeling system and the latest regional emission inventory. Isopleths can be further upgraded to isosurfaces when co-control on three types of emission sources is investigated. Using Guangzhou and Foshan as examples, we demonstrate that similar precursor-based O₃ isopleths can be associated with significantly different emission source co-control strategies. In Guangzhou, controlling solvent use emissions was the most effective approach to reduce peak O₃ levels. In Foshan, co-control of on-road mobile, solvent use, and fixed combustion sources with a ratio of 3:1:2 or 3:1:3 was best to effectively reduce the peak O₃ levels below 145 ppbv. This study underscores the importance of using emission source-based O₃ isopleths and isosurface diagrams to guide a precursor emission control strategy that can effectively reduce the peak O₃ levels in a particular area.