Related Experiment Video
Updated: Nov 2, 2025

Expression of Cementitious Pore Solution and the Analysis of Its Chemical Composition and Resistivity Using X-ray Fluorescence
Published on: September 23, 2018
Development of a Geochemical Speciation Model for Use in Evaluating Leaching from a Cementitious Radioactive Waste
Zhiliang Chen1, Peng Zhang1, Kevin G Brown1
1Department of Civil and Environmental Engineering, Vanderbilt University, Nashville, Tennessee 37215, United States.
Abstract:
Cast Stone has been developed to immobilize a fraction of radioactive waste at the Hanford Site; however, constituents of potential concern (COPCs) can be released when in contact with water during disposal. Herein, a representative mineral and parameter set for geochemical speciation modeling was developed for Cast Stone aged in inert and oxic environments, to simulate leaching concentrations of major and trace constituents. The geochemical speciation model was verified using a monolithic diffusion model in conjunction with independent monolithic diffusion test results. Eskolaite (Cr2O3) was confirmed as the dominant mineral retaining Cr in Cast Stone doped with 0.1 or 0.2 wt % Cr. The immobilization of Tc as a primary COPC in Cast Stone was evaluated, and the redox states of porewater within monolithic Cast Stone indicated by Cr are insufficient for the reduction of Tc. However, redox states provided by blast furnace slag (BFS) within the interior of Cast Stone are capable of reducing Tc for immobilization, with the immobilization reaction rate postulated to be controlled by the diffusive migration of soluble Tc in porewater to the surface of reducing BFS particles. Aging in oxic conditions increased the flux of Cr and Tc from monolithic Cast Stone.
More Related Videos
11:14Two-way Valorization of Blast Furnace Slag: Synthesis of Precipitated Calcium Carbonate and Zeolitic Heavy Metal Adsorbent
Published on: February 21, 2017
09:23Removal of Trace Elements by Cupric Oxide Nanoparticles from Uranium In Situ Recovery Bleed Water and Its Effect on Cell Viability
Published on: June 21, 2015
Related Concept Videos
Hydration of Cement
Strength and Heat of Hydration
The heat of hydration for each cement compound is significant; for instance, tricalcium aluminate (C3A) and...
Extraction: Advanced Methods
Soundness of Cement
Alkali Aggregate Reaction in Concrete
Types of Cement I
Type I (Ordinary Portland Cement) is widely used for general construction where special properties are not required. It has moderate sulfate resistance and heat of hydration.
Type II (Modified Cement) offers moderate resistance to sulfate attack and a lower rate of heat development compared to Type I. It is suitable for structures in...