Remediation of petroleum contaminated saline water using value-added adsorbents derived from waste coconut fibres

Oil spill from petrochemical industries into marine areas has resulted in severe environmental pollution. The use of natural sorbents to clean marine areas affected by petroleum contaminants is a promising approach to alleviate this problem. Therefore, this study aims at developing an technique that uses waste coconut fibres (Cocos nucifera L.) pre-treated with a "green" solvent, viz. protic ionic liquid (PIL) [2-HEA][Ac], for the remediation of oil in saline water. Conventional chemical pre-treatments (mercerisation/acetylation) and the innovative treatment (using PIL), chemical characterisation, Scanning Electron Microscope, Fourier-transform infrared spectroscopy, and oil sorption tests in hydrodynamic simulation on a laboratory scale were conducted. The fibres treated with PIL[2-HEA][Ac] possessed more pores and hydrophobic content than the mercerised/acetylated coconut fibres, indicating the efficiency of sorption. The average sorption of the PIL[2-HEA][Ac] fibre was 1.40 ± 0.06 g/g and that of the mercerised/acetylated fibre was 1.32 ± 0.12 g/g. Although the difference in sorption results is not significant, according to the Tukey test, fibre pre-treatment with PIL[2-HEA][Ac] is more advantageous than conventional treatments because it exhibits better average sorption results; furthermore, the synthesis procedure for PIL[2-HEA][Ac] is simple, reusable and non-toxic. Therefore, the use of these petroleum biosorbents is a technology with environmental benefits, such as the availability of the biosorbent in the form of biodegradable waste and treated with a "green" solvent, both of which can be reused. Thus, it adds value for its use in industries with a circular economy product; that are environment-friendly and economical.