Related Experiment Video
Updated: Nov 1, 2025

Tracking Microbial Contamination in Retail Environments Using Fluorescent Powder - A Retail Delicatessen Environment Example
Published on: March 5, 2014
Controlling flour dust exposure by an intervention focused on working methods in Finnish bakeries: a case study in
Antti Karjalainen1, Maija Leppänen1, Joonas Ruokolainen1
1Department of Environmental and Biological Sciences, University of Eastern Finland, Finland.
Abstract:
Objectives. The purpose of this study was to examine the effectiveness of intervention strategies to control mass concentrations and peak exposures of flour dust in two Finnish bakeries. The effect of the intervention on the proportion of various particle size fractions of the total particulate matter was also investigated. Methods. Mass concentrations of flour dust were measured during three working days in a pre-intervention and post-intervention study in both an industrial and a traditional bakery. Gravimetric sampling and real-time measurements were performed. Relevant intervention strategies focused on working methods were planned in collaboration with the managers of the bakeries. Results. The average mass concentration of inhalable flour dust reduced in most of the stationary locations post intervention. The reductions in exposure levels were between 39 and 45%. However, the exposure levels increased 28-55% in the breathing zone. Real-time measurements showed reductions in the peak mass concentrations in the traditional bakery post intervention. In both bakeries, the total particulate matter size fraction consisted predominantly of particles with an aerodynamic diameter lower than 1 µm and greater than 10 µm. Conclusion. Further studies are needed to plan more effective intervention measures supplemented by technical control methods in both bakeries.
Related Concept Videos
Factors Affecting Workability
Design Example: Managing Concrete Workability
Interpreting R Charts
An R chart plots the range of subsets of measurements collected from a process. Each point on the chart represents the range—defined as the difference between the maximum and minimum...

