Related Experiment Video
Updated: Nov 1, 2025

Fabricating Superhydrophobic Polymeric Materials for Biomedical Applications
Published on: August 28, 2015
Design and fabrication of polydopamine based superhydrophobic fabrics for efficient oil-water separation
Jixi Zhang1, Ligui Zhang1, Xiao Gong1
1State Key Laboratory of Silicate Materials for Architectures, Wuhan University of Technology, Wuhan 430070, P. R. China. xgong@whut.edu.cn.
Abstract:
In this work, we prepare a PDMS-SiO2-PDA@fabric with high water contact angle (WCA = 155°). Combining dopamine self-polymerization and a sol-gel method, SiO2 is in situ grown on a PDA-modified fabric surface to synergistically construct micro-nano rough structures. Finally, a superhydrophobic fabric is successfully obtained after coating the fabric with a layer of PDMS. The prepared fabric can maintain superhydrophobicity after immersion in various solvents (pH = 1, 3, 5, 7, 9, 11, 13, DMF, ethanol, THF, n-hexane) for 24 h and strong ultraviolet irradiation for 60 min. Thanks to the highly reactive PDA clusters, the stronger interfacial bond between the fabric and SiO2 enables it to withstand 180 min of washing and 159.22 N tensile stress, showing strong adhesion strength. In addition, the modified fabric has excellent self-cleaning properties and is resistant to contamination such as milk, coffee and tea. More importantly, the prepared fabric can selectively repel water and adsorb oil, achieving above 90% oil-water separation efficiency even after 8 cycles.

