Study on the effect of new type of suspended carrier on oxygen mass transfer characteristics

Based on the characteristic that the air can form a vortex around the carrier after passing through the suspended carrier, a new layered fan-like carrier and a wave multi-channel carrier were prepared by designing the spatial structure of the suspension carrier and combining 3D printing technology. Compared with commercially available multi-faceted hollow sphere carrier, clear water oxygenation experiment was carried out in a transparent organic glass reactor, and the aeration volumetric flow rate was 0.28, 0.42, 0.56, 0.70, and 0.84 VVM, respectively. The results show that the growth rate of dissolved oxygen, the saturation value of dissolved oxygen, and the oxygen mass transfer coefficient in the new type of carrier reactor are higher than those of commercially available multi-faceted hollow spheres and blank reactors at various aeration intensities. Under the condition of aeration volumetric flow rate at 0.56 VVM, the reactor can reach dissolved oxygen saturation at a faster rate of dissolved oxygen growth. Combined with the FLUENT numerical simulation and sewage treatment experiments, it is proved that changing the spatial structure of the carrier can accelerate the reoxygenation of the water body, increase the value of dissolved oxygen saturated in the water, and create ideal mass transfer conditions for the MBBR (moving bed biofilm reactor).