Influence of process and formulation parameters on the preparation of solid lipid nanoparticles by dual...

A promising strategy to formulate poorly water-soluble active pharmaceutical ingredients (APIs) is the application of these substances in solid lipid nanoparticles. These drug carrier systems are commonly prepared by high-pressure homogenization above the melting temperature of the utilized lipid. While being very useful for large-scale production this method is quite resource-consuming and does not allow simultaneous processing of multiple samples, e.g. for screening purposes. For this reason, an alternative manufacturing process, dual centrifugation, is introduced to prepare solid lipid nanoparticles. The ingredients of the dispersions were directly weighed into 2 mL vessels at room temperature without the need to prepare a pre-mix emulsion. Due to an additional rotation of the samples in the heated centrifuge as well as the addition of grinding media an intensive stressing of the samples was achieved. The emulsification process was finished within 10 min with sample temperatures of up to 90 °C being obtained. Dependent on the process set-up like grinding media size, filling ratio or process temperature and the composition of the lipid formulation, the achieved particles sizes were below 200 nm and had a narrow, monomodal size distribution.