Related Experiment Video
Updated: Oct 31, 2025

All-electronic Nanosecond-resolved Scanning Tunneling Microscopy: Facilitating the Investigation of Single Dopant Charge Dynamics
Published on: January 19, 2018
Responsivity enhancement of a strained silicon field-effect transistor detector at 0.3 THz using the terajet effect
Abstract:
We report on the enhancement of responsivity by more than one order of magnitude of a silicon-based sub-terahertz detector when a mesoscopic dielectric particle was used to localize incident radiation to a sub-wavelength volume and focus it directly onto the detector. A strained-silicon modulation field-effect transistor was used as a direct detector on an incident terahertz beam at 0.3 THz. A systematic study in which Teflon cubes were placed in front of the detector to focus the terahertz beam was performed. In this study, cubes with different sizes were investigated, and an enhancement of the responsivity up to 11 dB was observed for a cube with an edge length of 3.45 mm (or 3.45λ). Electromagnetic simulation results were in good agreement with the experimental ones and demonstrated that the size of the mesoscopic particle plays an important role in focalizing the electric field within an area below the diffraction limit. This approach provides an efficient, uncostly, and easy to implement method to substantially improve the responsivity and noise equivalent power of sub-terahertz detectors.
More Related Videos
Related Concept Videos
Biasing of Metal-Semiconductor Junctions
In Schottky junctions, where the semiconductor is n-type, applying a positive voltage to the metal relative to the semiconductor reduces its Fermi...
Biasing of FET
In an N-channel JFET, the structure consists of N-type material forming the channel on a P-type substrate, with the...
Field Effect Transistor
MOSFET: Enhancement Mode
In their basic form, enhancement-mode MOSFETs are typically non-conductive when the gate-source voltage (Vgs) is zero. This default 'off' state means no...
Biasing of P-N Junction
In equilibrium, no external voltage is applied across the p-n junction. The depletion region is formed at the junction interface due to the diffusion of carriers, which leaves behind charged dopants, acceptors on the p-side, and donors on the n-side. These immobile charges create an electric field that prevents further diffusion of carriers. The related energy band...
Metal-Semiconductor Junctions
Schottky Barriers
Schottky barriers arise when a metal with a work function (Φm) contacts a semiconductor with a different work function (Φs). Initially, electrons transfer until the Fermi levels of the metal and semiconductor align at equilibrium. For instance, if Φm > Φs, the semiconductor Fermi level is higher than the metal's before contact. The...

