From Street to Road: An Innovative Approach to Explore Discarded Chewing Gum as a Performance-Enhancing Modifier for...

To uncover the potential benefits of discarded chewing gum (DCG) as a performance-enhancing modifier for road pavement applications, its influence on the asphalt binder's attributes was profoundly examined. The base AP-5 asphalt along with its specimens dosed with various fractions of DCG (e.g., 3, 6, and 9 wt%) were analyzed by Fourier transform-infrared spectroscopy (FT-IR), X-ray diffraction (XRD), thin-layer chromatography-flame ionization detection (TLC-FID), scanning electron microscopy (SEM), atomic force microscopy (AFM), thermogravimetric analysis (TGA), and differential scanning calorimetry (DSC). Brookfield viscometer, ring and ball softening point, needle penetration, and dynamic shear rheometer (DSR) tests were adopted to inspect the physical and rheological changes of asphalt cement after DCG incorporation. FT-IR disclosed that the asphalt-gum interaction was not chemical but physical in nature, whilst XRD demonstrated the existence of talc filler in DCG, which may confer the bituminous mixes with exceptional engineering properties. Iatroscan analysis evinced that the gum treatment particularly altered the aromatic and resin fractions; meanwhile, the content of saturates and asphaltenes remained relatively unchanged. SEM divulged that the DCG has a complete dissolution within the bitumen matrix, which becomes rougher due to higher dose administration. AFM revealed that the steady gum introduction amplified the size of bee-like structures, shrunk their peri-phase domains, and wiped out the para-phase domains entirely. TGA/DTGA/DSC data highlighted that the high-temperature-stable additive slightly affected the thermal properties of blends. DSR and empirical rheological tests showed that the waste gum made the bitumen less vulnerable to heat and tender, thereby boosting its resistance against fatigue cracking at intermediate service temperatures. On top of that, DCG widened the thermal window of bitumen performance grade (PG), and preserved its viscosity at standard temperatures, leading to maintaining an appropriate workability for asphalt mix. In brief, the use of discarded chewing gum as an asphalt modifier is feasible and could mitigate plastic pollution and provide durable roadways by delivering superior performance.