A New Flattened Cylinder Specimen for Direct Tensile Test of Rock

In recent decades, researchers have paid more attention to the indirect tensile test than to the direct tensile test (DTT) of rocks, mainly due to difficulties in the alignment and the stress concentration at the end of an intact cylindrical specimen. In this paper, a new flattened cylinder specimen and a clamp device were designed to obtain the true tensile strength of the rock in DTT. Stress distributions of the specimen with different lengths (l) and cutting thicknesses (t) were analyzed, and damage processes of the specimen were monitored by the Digital Image Correlation (DIC), the fractured sections were also scanned. Different mechanical parameters were also obtained by the DTT of the flattened cylinder specimens and the intact cylinder specimens, as well as the Brazilian disc. Research results show that the tensile strength obtained by DTT is smaller than the Brazilian disc and is slightly greater than the intact cylindrical specimen. The flattened cylinder specimen with 0.20 ≤ 2t/D < 0.68 and 0.10 ≤ l/D ≤ 0.20 is recommended to measure the true tensile strength of rock material in DTT. This new shape of the specimen is promising to be extended in the uniaxial or triaxial direct tension test.