Related Experiment Video

Updated: Oct 30, 2025

Fabrication of Compressed Hosiery and Measurement of its Pressure Characteristic Exerted on the Lower Limbs
08:39

Fabrication of Compressed Hosiery and Measurement of its Pressure Characteristic Exerted on the Lower Limbs

Published on: May 27, 2020

2.6K

Development of a Care Labelling Process for Compression Stockings Based on Natural (Cotton) Fibers

Cevza Candan1, Banu Nergis1, Sena Cimilli Duru1

  • 1Faculty of Textile Technologies and Design, Istanbul Technical University (ITU), Istanbul 34467, Turkey.

Polymers
|July 2, 2021
PubMed

Keywords:
care labellingcottonmedical compression stockingnylon

More Related Videos

Fabricating Cotton Analytical Devices05:40

Fabricating Cotton Analytical Devices

Published on: August 30, 2016

6.9K
Wicking Tests for Unidirectional Fabrics: Measurements of Capillary Parameters to Evaluate Capillary Pressure in Liquid Composite Molding Processes07:06

Wicking Tests for Unidirectional Fabrics: Measurements of Capillary Parameters to Evaluate Capillary Pressure in Liquid Composite Molding Processes

Published on: January 27, 2017

8.9K

Related Concept Videos

PPE Use in Healthcare Settings I: Donning01:22

PPE Use in Healthcare Settings I: Donning

Donning PPE must be completed before contact with the patient. This process protects from infectious agents. The sequence and action included in each donning are critical, and the steps must be systematic to avoid exposure to pathogens. The institutional policy also needs to be followed while donning PPE. The pre-donning preparations are gathering equipment, inspecting the PPE equipment for tears, holes, or damage, removing jewelry, removing any garments below the elbows, and tying the hair...
1.4K
PPE Use in Healthcare Settings II: Doffing01:10

PPE Use in Healthcare Settings II: Doffing

The sequence of removing or doffing PPE starts with the gloves, as they are the most contaminated. Next is removal of the face shield or goggles, as they would interfere with removing other PPE. Then remove the gown, followed by the mask or respirator. Perform hand hygiene between steps if hands become contaminated and immediately after removing all PPE. Generally, the outside front and sleeves of the isolation gown, the goggles or the mask, the respirator, and the face shield are contaminated.
1.3K