Optimized Aluminum Reflector for Enhancement of UVC Cathodoluminescence Based-AlGaN Materials with Carbon Nanotube
Manoj Kumar Chandra Mohan1, Sang Kyun Shim1, June Key Lee1,2
1Department of Materials Science and Engineering, Chonnam National University, Gwangju 61186, Korea.
Abstract:
The far ultraviolet C (UVC) light sources based on carbon nanotube (CNT) field emitters as excitation sources have become promising light sources for sterilization, disinfection, and water purification. However, the low light extraction efficiency of UVC-CNT light sources still hinders the practical application of these structures. Herein, we report an optimized aluminum (Al) reflector to enhance the light extraction efficiency of UVC-CNT light sources. Optical analysis of UVC-CNT light sources covered by the Al reflectors with various thicknesses ranging from 30 to 150 nm was performed to realize the optimized reflector. The UVC-CNT light sources exhibit the highest light extraction efficiency when the Al reflector layer has an optimized thickness of 100 nm. For comparison, the cathodoluminescence (CL) spectra were recorded for UVC-CNT light sources with and without the optimized Al reflector. The measured light output power and the estimated power efficiency of the UVC-CNT light-source-tube with Al reflector were enhanced by about 27 times over the reference. This enhancement is mainly attributed to the outstanding reflection effect of the Al reflector.
More Related Videos
07:00Graphene-Assisted Quasi-van der Waals Epitaxy of AlN Film on Nano-Patterned Sapphire Substrate for Ultraviolet Light Emitting Diodes
Published on: June 25, 2020
09:34Synthesis and Characterization of Fe-doped Aluminosilicate Nanotubes with Enhanced Electron Conductive Properties
Published on: November 15, 2016