Related Experiment Video
Updated: Oct 30, 2025

Calibrated Passive Sampling - Multi-plot Field Measurements of NH3 Emissions with a Combination of Dynamic Tube Method and Passive Samplers
Published on: March 21, 2016
Research on ammonia emissions characteristics from light-duty gasoline vehicles
Yingshuai Liu1, Yunshan Ge2, Jianwei Tan2
1Weifang University of Science and Technology, Weifang 262700, China; National Lab of Auto Performance and Emission Test, School of Mechanical and Vehicular Engineering, Beijing Institute of Technology, Beijing 100081, China.
Abstract:
In this study, ammonia emissions characteristics of typical light-duty gasoline vehicles were obtained through laboratory vehicle bench test and combined with New European Driving Cycle (NEDC) condition and Worldwide Harmonized Light Vehicles Test Cycle (WLTC) condition. The influence of ambient temperature on ammonia emissions is mainly concentrated in the cold start stage. The influence of ambient temperature on ammonia emission is shown that the ammonia emissions of light-duty gasoline vehicles under ambient temperature conditions (14 and 23°C) are lower than those under low ambient temperature conditions (-7°C) and high ambient temperature conditions (35 and 40°C). The influence of TWC on ammonia emission is shown that ammonia is a by-product of the catalytic reduction reaction of conventional gas pollutants in the exhaust gas in the TWC. Under NEDC operating conditions and WLTC operating conditions, ammonia emissions after the catalyst are 45 times and 72 times that before the catalyst, respectively. In terms of ammonia emissions control strategy research, Pd/Rh combination can reduce NH3 formation more effectively than catalyst with a single Pd formula. Precise control of the engine's air-fuel ratio and combination with the optimized matched precious metal ratio TWC can effectively reduce ammonia emissions.
Related Concept Videos
Gas Chromatography: Types of Detectors-II
Free Energy Changes for Nonstandard States
where R is the gas constant (8.314 J/K·mol), T is the absolute temperature in kelvin, and Q is the reaction quotient. This equation may be used to predict the spontaneity of a process under any given set of conditions.
Reaction Quotient...
Flame Photometry: Overview
Chemical Stoichiometry and Gases: Using Ideal Gas Law to Determine Moles
Emission Spectra
Physical Properties of Amines

