Theoretical and Experimental Study of 3-Pentanol Autoignition: Ab Initio Calculation, Shock Tube Experiments, and...

3-Pentanol is a potential alternative fuel or a green fuel additive for modern engines. The H-abstraction reactions from 3-pentanol by H, CH₃, HO₂, and OH radicals are significant in the 3-pentanol oxidation process. However, corresponding rate constants are forced to rely on either analogy from sec-butanol or estimation from alkanes due to a lack of direct experimental and theoretical study. In this work, stationary points on the potential energy surfaces (PESs) were calculated with the high-level DLPNO-CCSD(T)/CBS(T-Q)//M06-2X/cc-pVTZ method, which is further used to benchmark against the CBS-QB3 method. Then, the high-pressure limit rate constants for target reactions, over a broad range of temperature (400-2000 K), were calculated with the phase-space theory and conventional transition state theory. A comparison was made between the calculated rate constants and the values available in Carbonnier et al. [ Proc. Combust. Inst. 2019, 37(1), 477-484]. The rate constants for the above H-abstraction reactions in the Carbonnier model were updated with the calculated results, followed by a modification based on the computed results of 3-pentanol + HO₂ to obtain the revised model. Validation against the shock tube (ST) and the jet-stirred reactor (JSR) measurements from the literature proved the revised model an optimal one. Furthermore, using an ST, ignition delay times (IDTs) for the 3-pentanol/air mixtures were measured spanning a temperature range of 920-1450 K, pressures of 6, 10, and 20 bar, and equivalence ratios of 0.5, 1.0, and 1.5. Generally, IDTs decrease with increasing temperature and reflected shock pressure. Improved predictions to present experimental data were obtained by using the revised model as compared with the Carbonnier model. Finally, sensitivity analysis was conducted using the revised model to gain an in-depth comprehension of the 3-pentanol autoignition.