Improving methane production from algal sludge anaerobic fermentation by peroxydisulfate (PDS) pretreatment

This study investigated the potential of improving methane production from algal sludge anaerobic digestion by peroxydisulfate (PDS) pretreatment. The results show that with PDS dosage at 0.02 g PDS/g algal sludge TSS, PDS added system has highest accumulative methane production after 60 days fermentation. The accumulative methane production was 1.08, 1.15, 1.14, 1.13, 1.08, 0.76, and 0.15 times as compared with control, at 0.01, 0.02, 0.05, 0.1, 0.2, 0.5, and 1 g PDS/g algal sludge TSS added, respectively. The SCOD in the system was keep increasing with the increment of PDS dosage after 120 min pretreatment. The algal sludge dewatering rate was increased with adding of PDS as pretreatment. The addition of PDS has inhibited the activities of microbes involved in digestion, while the short chain fatty acids production was improved after 3 days digestion. One-substrate model can be used to simulate the methane yield. The hydrolysis rate was decreased after dosing with PDS, while highest actual and predicted accumulative methane yield was occurred at 0.02 g PDS/g algal sludge TSS. Proteobacteria has higher percentage when the PDS was not higher than 0.1 g PDS/g algal sludge TSS, Acetothermia has higher percentage at 0.01 g PDS/g algal sludge TSS. The microcystin-LR (MC-LR) in algal sludge was largely removed after digestion, including the intracellular MC-LR. The higher PDS dosage could cause heavy metal release from algae cell to the digestate during fermentation. The addition of PDS to algal sludge can improve the accumulative methane production and mitigate microcystin concentration.