Related Experiment Video
Updated: Oct 30, 2025

Two-way Valorization of Blast Furnace Slag: Synthesis of Precipitated Calcium Carbonate and Zeolitic Heavy Metal Adsorbent
Published on: February 21, 2017
Removal of heavy metals in municipal solid waste incineration fly ash using lactic acid fermentation broth
Xiaona Wang1, Ming Gao1,2, Menglu Wang1
1Department of Environmental Engineering, School of Energy and Environmental Engineering, University of Science and Technology Beijing, 30 Xueyuan Road, Haidian District, Beijing, 100083, China.
Abstract:
Municipal solid waste incineration fly ash (MSWIFA) is considered as a hazardous solid waste because of the high mobility of heavy metals. In this study, the removal of heavy metals in MSWIFA using lactic acid fermentation broth (LAFB) under various leaching protocols (i.e. LAFB addition amount and timing) was investigated. Results revealed that compared with that in pure lactic acid solution, the synergistic effect of various substances in LAFB was more favourable to the dissolution of heavy metals. Although the content of acid-soluble heavy metals in MSWIFA decreased after leaching with LAFB, the leaching toxicity measured by acetic acid buffer solution method increased to varying degrees (except that of Cr). Moreover, the maximum leaching concentration of Pb was 14.1 mg/L (standard limit, 0.25 mg/L), which was not conducive to the landfill treatment of MSWIFA. However, if the LAFB-treated MSWIFA was used in cement kiln for co-disposal, the amount of MSWIFA entering the kiln was 6.0 percentage points higher than that in pure water leaching. Therefore, LAFB leaching instead of water leaching is expected to be an effective pre-treatment method for the utilisation of MSWIFA.
More Related Videos
16:33Methods for Facilitating Microbial Growth on Pulp Mill Waste Streams and Characterization of the Biodegradation Potential of Cultured Microbes
Published on: December 12, 2013
08:14Scalable Step-by-Step Approach of Sustainable Bioplastic Production from Food Waste
Published on: July 18, 2025