Related Experiment Video
Updated: Oct 30, 2025

Evaluation of the Efficacy of Organic Peroxyacids for Eradicating Dairy Biofilms Using an Approach Combining Static and Dynamic Methods
Published on: December 9, 2022
Effects of temperature and microorganism densities on disinfection by-product formation
Jing-Syuan Zeng1, Hsin-Hsin Tung2, Gen-Shuh Wang1
1Institute of Environmental and Occupational Health Science, College of Public Health, National Taiwan University, Taipei, Taiwan.
Abstract:
This study investigated the role of microorganisms on the correlation between temperature changes and disinfection by-product formation in natural waters. Climate changes have resulted in an increase in the global surface temperature. Studies have revealed that increases in temperature may change the composition of dissolved organic matter (DOM), which may contain major disinfection by-product (DBP) precursors. This change in the DOM composition may affect DBP formation after conventional water treatment processes. Understanding the role of microorganisms in DOM composition as well as DBP formation and speciation is critical for controlling DBP formation. In this study, laboratory stimulatory experiments were conducted on water samples from various sources, at various temperatures, and with various microbial concentrations. The results revealed a decreasing trend of dissolved organic carbon (DOC), trihalomethane formation potential (THMFP), and haloacetic acid formation potential (HAAFP) at high temperature incubations irrespective of microbial concentrates. This result may be attributed to the fact that microorganism activities or concentrations in water increase at higher temperatures, which may result in higher DOC consumption and lower DBP formation. Water samples spiked with bacteria concentrates exhibited higher THMFP or HAAFP reduction than did samples without bacteria concentrates. A higher biomass in water may contribute to a higher consumption of DOC and consequently lower DBP formation potentials, especially at high incubation temperatures.
More Related Videos
Related Concept Videos
Physical Methods for Controlling Microbial Growth: Temperature
Factors Influencing Microbial Growth: Temperature
Methods of Sterilization I: Physical Methods
Steam sterilization uses non-toxic, low-cost moist heat in the form of saturated steam under pressure, which is fast, microbicidal, and sporicidal, and quickly warms and penetrates fabrics. Autoclaves, or steam sterilizers, expose each item to direct steam contact for a predetermined time at the necessary...
Antimicrobial Effectiveness
Methods for Controlling Microbial Growth
Chemical Agents for Microbial Control

